The three phase domestic auto phase changer is designed to maintain uninterrupted power supply to household appliances by automatically selecting the best available phase during voltage drops or phase failures. It continuously monitors all three phases and instantly switches to a healthy phase ensuring stable power for single phase loads such as lights fans refrigerators and home electronics. Built with a durable enclosure and reliable relay mechanism this unit provides long term performance and enhanced electrical safety. Its compact design and simple installation make it ideal for residential buildings where power fluctuation is common.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage 415 V
- Frequency Rating 50 Hz
- Load Capacity Up To 5 kW
- Phase Monitoring Range 150 To 260 V
- Switching Time 1 Sec
- Relay Count 3 Nos
Other Attributes
- Enclosure Strength Level IP55
- Power Consumption 8 W
- Output Terminals 4 Nos
- Installation Method 1 Unit Wall Mount
- Service Life 10 Years Approx
The three phase domestic dry run and timer controller is engineered to ensure the safe and efficient operation of household water pump motors. It protects the pump from dry running by automatically detecting low water flow or no water conditions and shutting down the motor to prevent damage. The built in timer allows users to set the running duration ensuring controlled operation and energy savings. It continuously monitors voltage conditions and provides overload and phase protection for uninterrupted performance. Its strong enclosure and reliable electronic sensing system make it ideal for long term domestic water pumping applications.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage 415 V
- Frequency Rating 50 Hz
- Motor Capacity Support Up To 5 HP
- Dry Run Sensitivity Level 1 Level Auto Detection
- Timing Range 1 To 999 Min
- Overload Protection Range 1 To 25 A
- Low Voltage Cutoff 300 V
Other Attributes
- High Voltage Cutoff 460 V
- Relay Count 3 Nos
- Enclosure Strength Level IP55
- Power Consumption 10 W
- Installation Method 1 Unit Wall Mount
- Service Life 10 Years Approx
The water level controller is designed to automate water pump operation by monitoring the water levels in overhead and underground tanks. It ensures efficient water management by automatically starting the pump when the water level is low and stopping it once the tank becomes full. The system includes dry run protection to prevent the pump from running without water and protects the motor from potential damage. Built with durable materials and simple wiring the controller offers long term reliability and easy installation for domestic water systems. Its accurate sensors and electronic control mechanism make it an essential device for modern households.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage 230 V
- Frequency Rating 50 Hz
- Sensor Count 3 Nos
- Motor Capacity Support Up To 2 HP
- Dry Run Protection Level 1 Level Auto Cut
- Water Level Detection Range 0 To 100 Percent
Other Attributes
- Relay Rating 30 A
- Power Consumption 5 W
- Enclosure Strength Level IP54
- Output Terminals 4 Nos
- Installation Method 1 Unit Wall Mount
- Service Life 8 Years Approx
3 phase motor starters are designed to provide safe and efficient control for three phase motors used in industrial and agricultural operations. They ensure smooth motor start and stop while protecting against overload, short circuits, and phase failure. Available in both DOL and Star Delta configurations, the starters support a wide range of motor capacities. The sturdy metal enclosure with IP54 protection safeguards internal components against dust and moisture. LED indicators display operational status and faults. The starters are compatible with standard wiring and control panels and are easy to install, providing long lasting reliable motor control.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage (V) 415
- Max Motor Power (HP) 1 – 15
- Max Current (A) 5 – 40
- Starter Type 3 (Star / DOL / Auto)
- Frequency (Hz) 50 / 60
- Control Voltage (V) 24 / 230
- Operating Temperature (°C) -10 – 60
Other Attributes
- Starter Weight (Kg) 2 – 8
- Length (cm) 25 – 45
- Width (cm) 15 – 35
- Height (cm) 12 – 18
- Protection Level (IP) 54 – 55
- Warranty (Years) 1
The 260-440 No Volt Coil is Designed To Ensure Operational Safety By Preventing Motors From Restarting Automatically After Power Outages. This Coil Can Be Integrated With Standard Industrial Contactors And Provides Reliable Performance Across Various Electrical Systems. It Offers Easy Installation And Maintenance With Wide Voltage Compatibility.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage (V) 260 – 440
- Coil Current (A) 1 – 5
- Power Rating (W) 50 – 100
- Frequency (Hz) 50 / 60
- Operating Temperature (°C) -10 – 60
- Coil Resistance (Ω) 100 – 500
Other Attributes
- Coil Weight (Kg) 0.3 – 0.7
- Length (cm) 8 – 12
- Width (cm) 5 – 8
- Height (cm) 6 – 10
- Insulation Class 2
- Warranty (Years) 1
The openwell motor controller is specially designed for efficient and safe operation of openwell water pumps used in agricultural, domestic, and industrial applications. It provides reliable overload, dry run, and short circuit protection to safeguard the pump from electrical faults and unsafe conditions. Built with a heavy duty corrosion resistant steel enclosure, the controller ensures long term durability even in harsh outdoor environments. It supports manual and automatic modes for flexible operation and includes LED status indicators for easy monitoring. The direct online starting mechanism offers smooth and efficient motor performance, making it suitable for continuous water supply applications.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage (V) 230 / 415
- Motor Capacity (HP) 0.5 – 5
- Max Load Current (A) 6 – 25
- Frequency (Hz) 50 / 60
- Control Voltage (V) 12 / 24
- Start Type 1 (DOL)
Other Attributes
- Overload Range (A) 6 – 32
- Operating Temperature (°C) -10 – 60
- Panel Weight (Kg) 2 – 5
- Enclosure Size (cm) 30 × 22 × 14
- Protection Level (IP) 54
- Warranty (Years) 1
The Autoplus motor controller is designed to provide automatic and reliable control for various types of water pumps including borewell, openwell, and industrial pumps. It ensures continuous motor protection with features such as overload, dry run, and short circuit safety. The sturdy corrosion resistant steel enclosure increases durability and ensures long service life. The controller supports both automatic and manual operation modes, making it suitable for a wide range of water handling applications. LED indicators allow clear monitoring of running and fault conditions, while the lockable door and emergency cutoff feature add layers of safety for operators and equipment.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage (V) 230 / 415
- Frequency (Hz) 50 / 60
- Load Capacity (HP) 1 – 20
- Control Mode 2 (Auto / Manual)
- Relay Rating (A) 10 – 30
- Overload Protection Level 3
Other Attributes
- Enclosure Protection Level IP55
- Panel Sheet Thickness (mm) 1.2
- Indicator Display Count 3
- Cable Entry Size (mm) 20
- Operating Temperature (°C) -10 – 55
- Warranty (Years) 1
The Auto Start motor controller is designed to provide automatic operation for water pumps used in agricultural, domestic, and industrial applications. It enables pumps to start automatically when power resumes or when water level signals are detected, making it ideal for unattended pumping operations. The panel includes dry run, overload, and short circuit protection to safeguard the motor from damage. Built with a corrosion resistant steel enclosure, it offers long lasting performance in various environmental conditions. LED indicators help monitor operational and fault status, while both manual and automatic modes provide flexibility for users.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage (V) 230 / 415
- Frequency (Hz) 50 / 60
- Motor Capacity (HP) 1 – 15
- Auto Start Mode Level 1
- Relay Rating (A) 10 – 30
- Dry Run Protection Level 2
Other Attributes
- Overload Protection Level 3
- Enclosure Protection Level IP54
- Panel Sheet Thickness (mm) 1.2
- Indicator Lamp Count 3
- Cable Entry Size (mm) 20
- Warranty (Years) 1
The Single Phase Preventer MT 201 is designed to protect motors from single phasing, overload, and voltage imbalance conditions. It continuously monitors the input supply and provides an automatic trip signal to prevent damage to the motor during abnormal situations. The device uses a relay based output system that ensures fast and accurate response. Its durable polycarbonate body offers long term reliability even in demanding environments. LED indicators provide clear information on power status and fault conditions. The MT 201 can be easily mounted on panels or walls and is widely used in agricultural, industrial, and domestic pumping systems.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage (V) 180 – 260
- Frequency (Hz) 50 / 60
- Phase Type 1 (Single Phase)
- Load Handling Capacity (HP) 1 – 5
- Protection Level 3 (Low / High Voltage, Phase Loss)
- Response Time (ms) 200
Other Attributes
- Power Consumption (W) 3
- Relay Output Rating (A) 10
- Mounting Type 1 (Panel Mount)
- Operating Temperature (°C) -10 – 55
- Dimensions (mm) 75 × 55 × 30
- Warranty (Years) 1
The Single Phase Preventer INT-101 is designed to provide comprehensive protection for motors against single phasing, overload, and voltage imbalance conditions. It continuously monitors the incoming supply and automatically trips the motor in case of abnormal conditions. The relay based output system ensures fast and accurate operation to prevent motor damage. The durable polycarbonate enclosure guarantees long lasting performance even in harsh industrial and agricultural environments. LED indicators provide clear status and fault information, making it easy for users to monitor motor health. The device can be mounted on panels or walls, providing flexible installation options for a variety of motor systems.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage (V) 180 – 260
- Frequency (Hz) 50 / 60
- Phase Type 1 – 3
- Protection Level 2 (Low Voltage & Phase Failure)
- Response Time (ms) 200
- Power Consumption (W) 3
Other Attributes
- Relay Output Rating (A) 10
- Mounting Type 1 (Panel Mount)
- Operating Temperature (°C) -10 – 55
- Dimensions (mm) 70 × 50 × 28
- Warranty (Years) 1
The Single Phase Preventer INT-301 5Wire is engineered to protect motors from single phasing, overload, and voltage imbalance. It continuously monitors the electrical supply and automatically trips the motor during abnormal conditions to prevent damage. The five wire relay based output system ensures fast and precise operation. The device is enclosed in a durable high strength polycarbonate body suitable for industrial, agricultural, and domestic environments. LED indicators display power and fault conditions clearly for easy monitoring. The preventer can be mounted on panels or walls, offering flexible installation options for a wide range of motor applications.
Cheque,NEFT and RTGS
Key Attributes
Industry-specific Attributes
- Operating Voltage (V) 180 – 260
- Frequency (Hz) 50 / 60
- Phase Type 1 (Single Phase)
- Motor Capacity (HP) 1 – 5
- Protection Level 3 (Phase Loss, Low/High Voltage)
- Response Time (ms) 200
Other Attributes
- Power Consumption (W) 3 – 5
- Relay Output Rating (A) 10
- Number Of Wires 5
- Mounting Type 1 (Panel Mount)
- Operating Temperature (°C) -10 – 55
- Warranty (Years) 1
